Combined Addressable Smoke And Heat Detector
Availability:In Stock!
smoke with fixed temperature and rate-of-rise heat detector. The detector uses an optical sensing chamber to detect smoke and a fixed-temperature heat sensor to detect heat from fire. It is designed to provide open area protection . The red LED on the detector provides a local 360°visible alarm indication. The detector that initiated the alarm condition will have its red LED latched until reset by panel.
KSh 3,500.00
Comparesmoke with fixed temperature and rate-of-rise heat detector. The detector uses an optical sensing chamber to detect smoke and a fixed-temperature heat sensor to detect heat from fire. It is designed to provide open area protection . The red LED on the detector provides a local 360°visible alarm indication. The detector that initiated the alarm condition will have its red LED latched until reset by panel.
Based on 0 reviews
Be the first to review “Combined Addressable Smoke And Heat Detector”
Related products
-
Addressable fire alarm systems
Addressable Fire Alarm Annunciator Panel
Asenware Addressable Fire Alarm Annunciator Panel is a 24 Zone Board, which can be configured at the site as per,the Fire Alarm System Layout drawing. It includes keyboard, Power LED and buzzer. Fire Alarm Annunciator Panel can extensions 24 zone board. it can be used with AW-FP100 Series Addressable Fire Alarm Control Panel.
Fire Alarm Annunciator Panel Feature
- Three Lines of 40 Character each LCD
- LED Indication for Alarm, Fault and Supervisory
- Push Buttons to acknowledge the silence
- Lamp Test from Key Switch
- IP 30 Cabinet
SKU: n/a -
Addressable fire alarm systems
Addressable Manual Call Point
Addressable manual call point is mainly designed to be used with an intelligent two-bus control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system,after receiving the alarm signal, display the coded address and the equipment status of the manual fire call points.
When the manual fire call points is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit. Addressable supports electronic coding, more suitable for engineering application convenient.
Addressable Manual Call Point Feature:
- Semi-flush or surface mounting
- Compatible with the latest EN standards
- Lever reusable ( non-glass break )
- LED indicator
- Full electronic coding, through CODER-9001 encoder scene rewrite
SKU: n/a -
Addressable fire alarm systems
Asenware Addressable Smoke Detector
Addressable Smoke Detector features:
- Addressable-analog communication
- Low standby current for continuous monitoring (≤2.5mA)
- Two-wire connection
- Two LEDs (RED), blinks in normal condition and becomes stationary during fire
- Remote test from Panel
SKU: n/a -
Addressable fire alarm systems
Reflective Optical smoke beam detector for addressable fire systems
The installation of the detector uses a high-precision symmetrical infrared laser, which has good long-distance focusing, good consistency, and long-term stability and reliability; the appearance is exquisite and practical, with a variety of connection terminals, and the connection is flexible and convenient. It can be connected and used with the AW-FP100/128/200/2166 series panels (by model).
1.Supports isolation function
2. Supports infrared remote control operation.
3. Suitable for all larger warehouses or more open protection places
4.Meets all requirements of the latest EN54-12 standard
5.Optical distance can reach to maximum 160m, minimum 5mSKU: n/a
There are no reviews yet.