Addressable Power Transmitter
Availability:In Stock!
The AW-D121 power transmitter is used with addressable fire alarm control panel. It is mainly used to increase the load capacity of the addressable loop. And can increase the communication distance of the addressable loop.
Features
1. Surface mounting
2. Working status indicators
3. Full electronic coding
4. Output short-circuit protection
5. Compatible with the latest EN54-4 standard
KSh 24,000.00
The AW-D121 power transmitter is used with addressable fire alarm control panel. It is mainly used to increase the load capacity of the addressable loop. And can increase the communication distance of the addressable loop.
Features
1. Surface mounting
2. Working status indicators
3. Full electronic coding
4. Output short-circuit protection
5. Compatible with the latest EN54-4 standard
Based on 0 reviews
Be the first to review “Addressable Power Transmitter”
Related products
-
Addressable fire alarm systems
Asenware Addressable Heat Detector
Asenware addressable heat detector is an intelligent rate of rise heat detector, which can be configured with 1 to 8 Loop Addressable Fire Alarm Control Panel. Each heat detector can be given specific ID, which allows the panel to continuously monitor specific detector location. It reduces the maintenance cost and makes it easier to maintain the system.
Addressable Heat Detector Features:
- Addressable-analog communication
- Rate-of-rise feature activates when ambient temperature increases at the rate of 7.1 ℃/5S
- Low Standby current
- Two-wire connection
- Two LEDs (RED), blinks in normal condition and becomes stationary during fire alarm condition.
- Remote test from Panel
SKU: n/a -
Addressable fire alarm systems
Addressable Strobe Sounder Base
Asenware AW-D120 is an intelligent addressable sounder base for addressable detector (Model A) and conventional detector(Model B), which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (device) can be given specific ID, which allows the panel to continuously monitor specific addressable sounder base location (point) and give a visual and audible signal when panel enters fire alarm condition.
Addressable Strobe Sounder Base characteristics- Loop powered sounder
- LED indicator
- Two wire connection (easy to install)
- Can be used as a detector base
SKU: n/a -
Addressable fire alarm systems
Combined Addressable Smoke And Heat Detector
smoke with fixed temperature and rate-of-rise heat detector. The detector uses an optical sensing chamber to detect smoke and a fixed-temperature heat sensor to detect heat from fire. It is designed to provide open area protection . The red LED on the detector provides a local 360°visible alarm indication. The detector that initiated the alarm condition will have its red LED latched until reset by panel.
Features1. Low Standby current for continuous monitoring2. Two-wire connection3. Dual LED design provides 360° viewing angleSKU: n/a -
Addressable fire alarm systems
Addressable Fire Alarm Annunciator Panel
Asenware Addressable Fire Alarm Annunciator Panel is a 24 Zone Board, which can be configured at the site as per,the Fire Alarm System Layout drawing. It includes keyboard, Power LED and buzzer. Fire Alarm Annunciator Panel can extensions 24 zone board. it can be used with AW-FP100 Series Addressable Fire Alarm Control Panel.
Fire Alarm Annunciator Panel Feature
- Three Lines of 40 Character each LCD
- LED Indication for Alarm, Fault and Supervisory
- Push Buttons to acknowledge the silence
- Lamp Test from Key Switch
- IP 30 Cabinet
SKU: n/a
There are no reviews yet.