1.0mm fire Resistant alarm cable 100 meters
Availability:In Stock!
-
Fire Resistance:Designed to withstand fire conditions for a specified duration (e.g., PH30, PH60, PH120, according to BS EN 50200).
-
Low Smoke and Halogen-Free:Some versions are made with low smoke, zero halogen (LSZH) materials, crucial for public safety.
-
Standards:Commonly adhere to standards like BS 7629-1, BS EN 50200, BS5839-1, and BS5266.
-
Voltage Rating:Typically rated for 300/500V.
-
Bend Radius:A minimum bend radius (e.g., 8 times the diameter) is specified to prevent damage during installation.
-
Applications:Used in fire detection and alarm systems, emergency lighting, and voice communication circuits.
KSh 4,900.00
Compare1.0mm fire alarm cable is designed to resist the spread of fire into a new area. Fire-resistant or fire-rated cables are designed to maintain circuit integrity and continue to work for a specified period under defined conditions. Two core, 100m per roll.
Based on 0 reviews
Be the first to review “1.0mm fire Resistant alarm cable 100 meters”
Related products
-
Fire Alarm Systems
Conventional Fire Alarm Control Panel 4 Zone
Conventional Fire Alarm Control Panel 4 Zone is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 32 zones for larger applications.
Conventional Fire Alarm Control Panel 4 Zone Specification:
It is modularized design, the panel can expend from 1 zone to 32 zones easily.
2 level control mode by a lock
24VDC and 5VDC power supply output.
FIRE and FAULT signal output.
2 general sounders output.
Each zone has 1 circuit detectors input
Each zone can be disable by a button.
RESET button to reset the panel.
SILENCE button to stop BUZZER and SOUNDERS.
EVACUATE button to start a manual fire alarm immediately.
battery low protection function, when battery voltage lower than 21VDC
battery will be cut off automatically until the mains power is on.
an optional GSM module for fire alarm by SMSSKU: n/a -
Fire Alarm Systems
Asenware Standalone Battery Heat Detector
The detector is a temperature detector using the best hot runner and is very responsive. The detector is designed to provide open area protection without wiring and easy to install and construct; The red LED on each detector provides a local 360° visible alarm indication. They flash once every minute, indicating that the power is on and the detector is working.
Features
1.Easy to install, mounting bracket included
2. High quality durable sensor
3. Loud 85dB alarm and LED warning indicatorSKU: n/a -
Fire Alarm Systems
24V Conventional Fire alarm bell 6 inch
24V Conventional Fire alarm belFire alarm bell, a fire alarm device, generally used in public areas. In the event of an emergency situation is controlled by the alarm controller to trigger an alarm, one for each region under normal circumstances, be used for fire alarms, good warning sound effects.Fire alarm bell generally come in 6 inch and 8 inch Specification.
Fire alarm bell internally by a 24V DC motor driven by the crankshaft and connecting rod bells, no relays work, work current, high reliability.
Fire alarm for supporting specific products and linkage fire alarm systems, when the system recognizes fire broke out by linkage control equipment to the scene.
24V Conventional Fire alarm bell feature:
- Appearance, firm structure
- Easy to install, the typical American installation
- Has low power consumption, large volume, ring-tones crisp, continuous work extremely long life characteristics
- Perfectly configured in a variety of alarm systems
Working voltage 20VDC to 28VDC 20VDC to 28VDC Work current @24VDC ≤50mA ≤50mA Volume(dB) @1m ≥98dB ≥100dB Dimensions 150mm*150mm*60mm 200mm*200mm*67.5mm Net Weight 600g 1060g
SKU: n/a
There are no reviews yet.