-
×
Asenware convectional 2 Zone Fire Panel
1 × KSh 13,500.00 -
×
1.5MM Fire Resistant Cables 100M
1 × KSh 5,800.00
Subtotal: KSh 19,300.00
#Fire alarm system in kenya
Showing all 15 results
-
Fire Alarm Systems
1.5MM Fire Resistant Cables 100M
Fire-resistant cables can maintain normal operation for a certain period under flame burning conditions and maintain the line’s integrity. The amount of smoke produced when burning fire-resistant cable is less, especially with refractory materials, making fire-resistant flame retardant performance, especially in the case of burning, accompanied by water sprinkling and fire fighting.
SKU: n/a -
Addressable fire alarm systems
Addressable Fire Alarm Mini Control Panel
Mini Addressable Fire Alarm Control Panel AW-FP128 adopts 3.2-inch LCD screen, key operation, simple operation, beautiful man-machine interface.
The wired circuit of the machine can be connected to 128 devices, 80 groups of wireless circuits, a wirelesSKU: n/a -
Fire Alarm Systems
Asenware convectional 2 Zone Fire Panel
The conventional fire alarm panel is designed based on EN54 parts 2＆4 standard
And it is the central part of a conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision.
Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
SKU: n/a -
Fire Alarm Systems
Asenware Standalone Battery Heat Detector
The detector is a temperature detector using the best hot runner and is very responsive. The detector is designed to provide open area protection without wiring and easy to install and construct; The red LED on each detector provides a local 360° visible alarm indication. They flash once every minute, indicating that the power is on and the detector is working.
Features
1.Easy to install, mounting bracket included
2. High quality durable sensor
3. Loud 85dB alarm and LED warning indicatorSKU: n/a -
Fire Alarm Systems
AW-CMC2166-6 Manual push station
Conventional Manual Call Point is a safety device used in fire alarm and emergency notification systems. It allows individuals to manually activate an alarm signal in the event of a fire or other emergency situation. Here’s a description of the AW-CMC2166-6 Conventional Manual Call Point:
Product Name: AW-CMC2166-6 Conventional Manual Call Point
Key Features and Characteristics:
- Emergency Activation: The primary function of the manual call point is to provide a means for individuals to manually initiate an alarm in case of a fire or other emergency. When activated, it sends a signal to the fire alarm control panel to trigger the alarm and initiate the appropriate emergency response.
- Resettable: After activation, the manual call point can usually be reset using a key or tool provided with the device. This ensures that the alarm system can be returned to normal operation once the emergency situation is resolved.
- Break Glass or Push Button: Manual call points are typically available in two main types: break glass and push-button. Break glass models require breaking a glass element to activate the alarm, while push-button models are activated by pressing a button.
- Visible Activation Indicator: Many manual call points feature a visible indicator (often a colored flag or LED) that shows when the device has been activated. This helps responders identify the location of the alarm activation quickly.
- Test Function: Manual call points often include a test function, allowing users to verify that the device is operational without triggering a full alarm.
- Mounting: These devices are designed for wall mounting in strategic locations throughout a building or facility. They are typically installed near exits, stairwells, and other areas where people can easily access them in case of an emergency.
- Weatherproof Options: Some manual call points are designed to be weatherproof or suitable for outdoor use, making them suitable for use in a variety of environments.
- Compatibility: The AW-CMC2166-6 is part of a conventional fire alarm system. It is compatible with other components of the system, such as smoke detectors, heat detectors, and the fire alarm control panel.
- Tamper-Resistant: Manual call points are often designed to deter tampering or unauthorized activation. They may have security features to prevent false alarms.
- Compliance: Manual call points are typically manufactured to meet relevant fire safety standards and regulations, ensuring their reliability and performance in emergency situations.
SKU: n/a -
Fire Alarm Systems
Conventional Fire Alarm Control Panel 4 Zone
Conventional Fire Alarm Control Panel 4 Zone is the central part of conventional fire alarm system, designed for applications requiring smoke detector, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 32 zones for larger applications.
Conventional Fire Alarm Control Panel 4 Zone Specification:
It is modularized design, the panel can expend from 1 zone to 32 zones easily.
2 level control mode by a lock
24VDC and 5VDC power supply output.
FIRE and FAULT signal output.
2 general sounders output.
Each zone has 1 circuit detectors input
Each zone can be disable by a button.
RESET button to reset the panel.
SILENCE button to stop BUZZER and SOUNDERS.
EVACUATE button to start a manual fire alarm immediately.
battery low protection function, when battery voltage lower than 21VDC
battery will be cut off automatically until the mains power is on.
an optional GSM module for fire alarm by SMSSKU: n/a -
Fire Alarm Systems
Conventional Fire Alarm Control Panel 8 Zone
The Conventional Fire Alarm Control Panel 8 Zone is housed in the most attractive, modern designed, friendly user interface for easy operation and recognition. It has smaller size and easier for installation.The panel can also be ordered with a metal box.
Conventional Fire Alarm Control Panel 8 Zone
Automatic power switchover
12V2.3Ah High-capacity batteries
Fault supervision and notification
2 relay output circuits
2 sounder output circuits
Sounders and panel buzzer silence
Extensible application for GSM
Meets all requirements of latest EN54 part 2 and EN54 part 4SKU: n/a -
-
Fire Alarm Systems
Conventional Fire Alarm Strobe Sounder Beacon
Conventional Strobe Sounder Beacon can give audible and visual alarms after being connected to a DC24V power supply. It can be used with a bus-type fire alarm control panel through an output module. After receiving a start command given by the fire alarm control panel following an accident, the output module will start the Sounder Beacon. After that, the Sounder Beacon will give a dazzling visual alarm signal and a harsh audible alarm signal to remind the persons on the scene of the accident of the fact that a fire has occurred on the site quickly and the necessity to take related evacuation measures, thus preventing the fire accident from becoming a major one.
The Strobe Sounder Beacon may be used to give audible alarms and visual alarms at the scenes of accidents.It is applicable to places like high-rise residential buildings, public places, hotels, amusement buildings, factories, shopping centers, hospitals, schools, office buildings and stock exchanges, and particularly to the places with a low visibility or the possibility of generation of smoke.
Strobe Sounder Beacon feature:
Meet both EN54-3 and EN54 -23.
Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
Suitable for wall and ceiling mount application.
Providing 16 tones.
Highly efficient LED technology and specially designed lens.
Light output synchronization.SKU: n/a -
Fire Alarm Systems
Conventional Reflective Optical Beam Smoke Detector
AW-D130C is a Linear Beam Smoke Detector with telescope-style dual-mirrors structure; its professional mirror design ensures good product performance and signal stability at a distance of up to 160m. With a very powerful 32-bit MCU as the controller, AW-D130C plays high performance, responds more sensitively, controls more quickly, and can detect subtle changes.
Features
1. High-transparency telescope structure
2. Easy debugging, accurate and fast alignment, intelligent and fast calibration;
3.High quality, durability and highly sensitive sensor
4. Automatic compensation, improves the ability to resist dust and vibration interference and reduces false alarms.
5.Optical distance can reach to maximum 160m, minimum 5mSKU: n/a -
Fire Alarm Systems
Led Indicator Light For Fire Alarm
The device Led Indicator Light is remote LED uses a state of-the-art designs.
This LED is designed to be used with detectors. One 8mm LED provide local 360° visible alarm indication. They flash with the same as fire detector that be connected.SKU: n/a -
Addressable fire alarm systems
Reflective Optical smoke beam detector for addressable fire systems
The installation of the detector uses a high-precision symmetrical infrared laser, which has good long-distance focusing, good consistency, and long-term stability and reliability; the appearance is exquisite and practical, with a variety of connection terminals, and the connection is flexible and convenient. It can be connected and used with the AW-FP100/128/200/2166 series panels (by model).
1.Supports isolation function
2. Supports infrared remote control operation.
3. Suitable for all larger warehouses or more open protection places
4.Meets all requirements of the latest EN54-12 standard
5.Optical distance can reach to maximum 160m, minimum 5mSKU: n/a -
Fire Alarm Systems
Standalone Battery Smoke Detector
The Standalone Battery Smoke Detector is a photo-detector that uses the most advanced optical sensing chamber. It is designed to provide open area protection without wiring, and it is easy to install and construct.
The red indicator on the detector can provide visibility alarm in all directions. It flashes once every minute, indicating that the detector is working. When a fire alarm occurs, the indicator will be continuously lit until the smoke concentration is lower than the alarm threshold. When the battery is under low voltage, the indicator will flash and the buzzer will beep.
The test button is used to test whether the detector works normally. Each time the button is pressed, the buzzer emits a beep, the red indicator flashes. And the button can be used for local mute during a fire
SKU: n/a -
Fire Alarm Systems
Strobe Sounder For Conventional Fire Alarm System
Fire Strobe Sounder is a kind of terminal device for alarm; it is used for the sound and light alarm when the fire happens.
Fire Strobe Sounder feature
Adopt the two-wire or the four-wire system wiring method.
The main line end receives two main lines, No polarization.
Connect the power end to DC24V power line.SKU: n/a
